We are highly known contractor and services provider constructing elegant Waterproofing of Swimming Pools. Our Swimming Pool Waterproofing is undertaken by well-qualified and experienced with utmost care. These Waterproofing Systems are highly reliable in purity, durable in performance and highly economic in prices, in the nutshell we are offering the complete satisfaction of the customers

It’s natural for your pool to lose some water to evaporation, some to splash out, and some to back washing your filter. But if you routinely need to add more than two inches of water to your pool per week, you may have a leak. Get Swimming Pool Waterproofing

‘CWC’ provides the swimming Tanks waterproofing through the use of  Silicone Polymers Coatings  the treatment of critical areas such as horizontal and vertical joints,angles and all Walls As finishing for the waterproofing layer thus obtained it is used the epoxy coating a liquid finishing alternative to the common tiles or mosaics, to be applied directly onto the waterproofing layer. which realizes a good anchoring bridge even on ceramic surfaces, this system can be used to re-waterproof swimming pools or water tanks already covered with tiles or mosaic, thus allowing to avoid the removal and disposal of the existing coating for swimming Tank waterproofing

how to know the need of swimming pool waterproofing ?

It’s natural for your pool to lose some water to evaporation, some to splash out, and some to back washing your filter. But if you routinely need to add more than two inches of water to your pool per week, you may have a leak . The Swimming pool waterproofing is needed because they are more subjected to constant pressure of water. Concrete walls are not sufficient to avoid leakage of a swimming pools.  So a full waterproofing system should be applied before putting the swimming pool in service.

‘CWC’ provides the swimming pools waterproofing through the use of  Silicone Polymers Coatings  the treatment of critical areas such as horizontal and vertical joints, angles and all Walls As finishing for the waterproofing layer thus obtained it is used the epoxy coating a liquid finishing alternative to the common tiles or mosaics, to be applied directly onto the waterproofing layer. which realizes a good anchoring bridge even on ceramic surfaces, this system can be used to re-waterproof swimming pools or water tanks already covered with tiles or mosaic, thus allowing to avoid the removal and disposal of the existing coating for swimming pool waterproofing

Steps of swimming pool waterproofing

1)        Cleaning all  surface with brush or any other suitable means and washing with water, making the terrace dust free.

2)        Filling all cracks with specially prepared Silicone based crack fillers.

3)        Applying one coating of Acrylic polymers based modified contentious (white) coating above clean surfaces which seals all visible and invisible cracks and joints.

4)       Then  Second coating  of Flexible Emulsion Polymer with basic fillers “ CWC501” for better bonding of the surface.

5)        Applying Last and Final  Top Coating  “CWC505” which is a Acrylic  heat reflecting which protect all the base of flat roof coatings

Pond testing will be carried out keeping the water for 24 hours in case any leakage same will be rectified by specially prepared waterproof treatment.